Products

The affordable V300SD data recorder is the most common recorder for Pro Stock, Pro Modified and many other Sportsman classes.

This cable connects to the Power/RPM Hub on the V300SD/V500SD harness to provide an additional RPM input for Clutch or Converter RPM to the V300, V...

RPM & Power harness for your V300/V300SD/V500/V500SD. Provides connections for Engine RPM, Driveshaft RPM, Record Button and Power. Please note...

This 30′ cable features a 9 pin serial connector on either end, allowing users to program, download and perform telemetry sessions with a V500 data...

Stainless steel nut and 2-piece brass ferrule for 1/4" EGT probes. Please note that these are sold individually. If you purchase a full set of EGTs...

Performance Data Systems' Wheelie Bar Load Cell is designed to be installed on the compression bar(s) of a wheelie bar on a drag racing vehicle. Th...

T-Cable to connect devices EGTs to the X-Bus network.

The X1 Analog Module allows the connection of up to four high-speed (1000 Hz) sensors, making it ideal for monitoring all four shock travel sensors...

Performance Data Systems' very own X1 data recorder is NHRA approved for use in nearly all categories of drag race vehicles. It is also recommended...

Mount bracket for the EGT boxes for the X1 data logger. Allows for secure mounting of the EGT boxes to the header studs.

In order to reduce the number of wires that would be required to connect all of the digital / RPM sensors directly to the recorder (Engine RPM, Dri...

Performance Data Systems' X2 Data Logger is designed for use in applications with high cylinder pressures, high amperage magnetos and solid core se...

This XBus module allows users to connect a variety of 12-volt powered sensors to the XBus system. Comes with a 48" lead and features a female Molex...

These EGT sets provide critical exhaust gas temperature data from 4- and 8-cylinder engines to to the X1 data logger. Sets come with EGT junction b...

This XBus module allows users to connect a variety of 5-volt powered sensors to the XBus system. Comes with a 48" lead and features a female Molex ...

XBus cable to connect the ADU7 Display to an X1 data logger.

This air temp module and sensor is used to measure inlet air temperature using a 0-300°F sensor. Comes with a 72" lead. Sensor is 1/8" NPT. Compati...

XBus voltage module used to monitor remote voltage, such as ignition system or battery.  Compatible with all X1 data loggers and displays. Note: th...

XBus Boost pressure module and 75 PSI sensor. Compatible with all X1 data loggers and displays. Sensor thread is 1/8 NPT.

XBus Brake pressure module and 1500 PSI sensor. Compatible with all X1 data loggers and displays. Sensor thread is 1/8 NPT.

XBus Carburetor Fuel pressure module and 15 PSI sensor. Compatible with all X1 data loggers and displays. Sensor thread is 1/8 NPT.

XBus Converter pressure module and sensor. Compatible with all X1 data loggers and displays. Comes in both 0-300 psi (recommended) and 0-500 psi pr...

XBus Exhaust Back pressure module and 75 PSI sensor. Compatible with all X1 data loggers and displays. Sensor thread is 1/8 NPT.

Cable to extend XBus connections.