2 MAGNET SPLIT COLLAR

$45.00$60.00

These aluminum split collars provide a mounting platform for the magnets that are used to trigger the sensor when monitoring the revolutions of a shaft. They are typically used on rear end yokes or couplers to provide driveshaft RPM. Each collar is approximately .375” wide and houses two magnets which are located 180° apart.

Available in several popular sizes:
1.375″, 1.500″, 1.625″, 1.812″, 1.875″,
2.125″, 2.187″, 2.375″, 2.400″, 2.500″,
3.000″, 3.187″, 3.250″, 3.500″

For higher resolution, Performance Data Systems recommends an 8 magnet split collar.

Description

These aluminum split collars provide a mounting platform for the magnets that are used to trigger the sensor when monitoring the revolutions of a shaft. They are typically used on rear end yokes or couplers to provide driveshaft RPM. Each collar is approximately .375” wide and houses two magnets which are located 180° apart.

For higher resolution, Performance Data Systems recommends an 8 magnet split collar.

Additional information

Weight 0.500449 lbs
Diameter

0" – PN: CL-2M-105, 1.375" – PN: CL-2M-137, 1.500" – PN: CL-2M-150, 1.625" – PN: CL-2M-162, 1.812" – PN: CL-2M-181, 1.875" – PN: CL-2M-187, 2.125" – PN: CL-2M-212, 2.187" – PN: CL-2M-218, 2.375" – PN: CL-2M-2375, 2.400" – PN: CL-2M-240, 2.500" – PN: CL-2M-250, 3.000" – PN: CL-2M-300, 3.185" – PN: CL-2M-318, 3.250" – PN: CL-2M-325, 3.500" – PN: CL-2M-350